MATERIAL CHARACTERISTICS
- A material: For signal line application in which the blocking region is near100MHz. Impedance values selected for effectiveness at 10 to 300MHz.
(A 材):標準型, 適用於頻率在100MHz附近之信號線, 選擇作用頻率介於10~300MHz間之阻值
- B material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequency. Designed for high impedance at high frequency for high speed signal line applications.
(B 材):適用於需要在低頻時插入損失較低, 在高頻時阻值急升之產品. 此產品適用於在高頻有高阻值之高速信號線相關產品.
- K material: High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for effectiveness at 40 to 400MHz.
(K 材):適用於高於或接近100MHz之高頻範圍產品. 適合信號頻率距離截止頻率較遠之信號線相開產品, 選擇作用頻率介於40至400MHz之阻值.
- H material: Designed as a noise countermeasure for the 200MHz~1GHz range where the rise of the Z component is in the high frequency area.
(H 材):適用於頻率介於200MHz~1GHz範圍之雜訊對策, 此材料於高頻時阻值大幅上升.
CHARACTERISTICS
A material (A材)
B material (B材)
K material (K材)
H material (H材)
APPLICATION SELECTION GUIDE
